You likely recall the flexo printing evolution through the years in response to pressures from the economy and demand. As industries produced more, they required more packaging and more stylistic choices. And as they’ve required more packaging, they’ve required higher-quality printing to make their products more identifiable and promotable.
So flexo industry thinkers have continually returned to the drawing board to increase productivity and quality:
The result? Direct laser engraving (DLE) elastomer sleeves. There are four key ways DLE has changed the game in both flexo printing quality and efficiency.
Despite some lag time being adopted in the North American flexographic market, DLE has emerged in response to the prevalence of in-the-round (ITR) elastomer sleeves. They’re produced by removing non-printing areas through laser ablation.
Washing down photopolymer usually involves solvents that can be harmful to users and the environment if not disposed of correctly. Elastomer blends don’t require such solvents, and in most cases are cleaned up with a water- and soap-based cleaning detergent after the laser-ablation process.
For decades, flat photopolymer printing plates dominated the flexo market in North America. But in some applications, flat plates yield costly flexo printing quality control issues like press misregistration. ITR sleeves have become the solution for a seamless, continuous print.
Here are some of the benefits:
There are far fewer steps required to make an ITR elastomer sleeve press-ready, as compared to conventional photopolymer plates, digital photopolymer plates, and simple laser-engraved plates. Fewer steps mean fewer chances for error.
Elastomer sleeves’ thickness and durability allow them to print continuously 2-4x longer than photopolymer plates. You won’t need to buy or make multiple plates for long jobs or repeated short jobs, which typically require multiple cleanings and remounting.
Additionally, the process requires no extra labor and mounting materials. “Load-N-Lok” and you’re good to go.
Misregistration is one of the most common flexographic printing defects encountered in the industry. Quite often, it’s a problem of misalignment. But it also could stem from press mechanics or plate lift. Sleeves can be notched to align with each other as they’re engraved to achieve optimal registration.
Laser-engraved sleeves manufactured in the round don’t experience plate lift. You’ll also have fewer issues with cylinder bounce or uniformity.
Laser engraving technology can create some of the most intricate, detailed images possible. Here are some of the high-def capabilities:
What’s more, engraved elastomer sleeves are resistant to harsh chemicals and abrasion. There’s very little chance for image skewing from wear over time.
Without registration issues and vulnerability to wear and tear, DLE elastomer sleeves don’t create much-wasted substrate. There’s simply no need to waste ink printing costly lengths of the substrate, making adjustments, and testing more to get the quality you need.
This can also streamline your printing operation and limit labor costs. Your employees should be able to finish projects more quickly and move on to other tasks.
The success of your flexo printing operation hinges upon quality and efficiency. Now, with direct laser-engraving technology and ITR elastomer, you can achieve high-end print results in a fraction of the time.
With a great cleaning and maintenance regimen, your flexo sleeve investment could last a very long time.
Let’s work toward printing perfection. Can we help? Call (888) 545-2270.
(Editor's note: This article was originally published in February 2018 and was recently updated.)