Surface tension is one of two key factors in proper substrate wetting (the other being surface energy). Tension is what causes liquids moving to form into a spherical shape, as if they are surround by an elastic membrane under tension. The molecules want to stick to each other instead of breaking apart in the air. It can also keep small particles from sinking into liquids.
In flexo printing, surface tension has implications regarding ink coating properly on the substrate. Fortunately, surface tension can be measured using surface tension test ink.
This makes sure the surface is ready for printing and provides quality assurance controls during the printing process.
Here is everything you need to know about surface tension test ink, including its limitations:
Still not sure how to measure surface tension? For starters, since the objective of a flexo surface tension test is to determine surface wettability, know that test inks come in several surface tensions. That's a good thing, because surface wetting can be quite a challenge.
After pretreatment, the tester uses a brush to quickly apply a high-tension test ink to the surface. If the brush stroke edges remain stable for 2 seconds, that surface is considered to be wettable.
If the ink appears more in drop form than even strokes, the tester moves on to the next lower level of test ink until the tension of the surface is at least equal to that of the test ink.
Depending on the surface being checked, several types of ink may be used for a wetting tension test.
As a press operator, you may not want to invest in new test inks -- and you might not have to! To make it easier, you could follow the same procedure as noted above, but use your own press-ready ink.
The top priority in printing is to make sure the ink wets out on the substrate evenly. Due to the increased use of water-based inks and different types of substrate materials, more flexographic printers use this simple surface tension measurement so they can adjust the treatment process accordingly.
Failure to incorporate these techniques can result in:
These measurements are relative values, and there may only be slightly perceptible differences from one surface tension to the next.
The test only measures the surface tension/wettability of a specific sample of the substrate in a given environment at one certain point in time. The test materials must be exactly the same as the materials that'll be used in the printing process. As the testing continues, the nature of the substrate itself might change in relation to environmental factors.
Any delay between surface wettability testing and printing could result in different outcomes. Industry experience and a critical thought process are crucial to successfully using ink tests.
While no surface tension ink test is 100% failproof, sending your materials for out-of-house testing can yield more accurate results. A flexographic products supplier may already have the surface tension measurement methods and equipment in place to get you through testing smoothly.
If you’re experiencing printing defects linked to surface tension, give us a call. A member of our technical support team will walk you through your options.
(Editor's note: This article was originally published in July 2018 and was recently updated.)