Flexographic Printing Blog

How Load-N-Lok Revolutionized Flexographic Printing

For those of us in the flexographic printing business, we know that changing plates can be a time-consuming process and maintenance is often expensive. We wanted to make a product that cut down on preparation time, increased productivity, and...

Troubleshooting Blister Packaging Print Problems

Flexographic printing can achieve high resolution printing results on blister packaging, but care must be taken not to harm the integrity of the seal so the contents are not compromised by outside elements.

If you're experiencing issues with...

Photopolymer & Elastomer in Flexo: Pros and Cons

Elastomer blend or photopolymer: Which image carrier material will work best on a flexographic printing job? 

Answer: It depends. It also matters to your bottom line. 

So it’s important to know the difference to determine which applications call...

Oil Based vs Water Based Flexo Inks: Optimize Your Materials

Selecting ink for your flexographic printing projects isn't a decision to make without consideration. Additionally, ink selection should not be made considering cost alone. 

The ink you choose should be selected based on a variety of factors,...

Digital Flexo Printing: What Components Do You Need?

If you're reading this article, you're probably already familiar with flexographic printing, printing that uses cylinders and elastomer sleeves to print on a variety of substrates at high speeds, while achieving high quality products. 

But did...

Behind the Scenes of Flexographic Image Carrier Production

Behind every image carrier that leaves Luminite Products Corporation, there is a carefully engineered process of creation.

We’ve outlined this process below to take you on a virtual tour of what happens behind the scenes on our shop floor, and to...

Subscribe to Our Monthly Email Updates!

New Call-to-action

Check Out Our Popular Posts!